Reagent & supplies preferences (v6.03)

SUMMARY: In LabCollector you can have access to preferences for each module where you can configure the default parameters. For reagents & supplies you can go to PREFERENCES -> REAGENTS&SUPPLIES and access various options. Please see what the below option have … Continued

How to link a custom module to LSM?

SUMMARY: LSM (Lab Service Manager) add-on is for service/test labs to manage sample and test information. LSM add-on now allows to link custom module into job level in LSM. To connect a custom module follow the below steps. 1. Create … Continued

How to use chemistry editor?

SUMMARY: The molecular editor is present in both the Chemistry module and ELN. Chemistry editor can be used to create a chemical structure and save it as a record. It also provides you the possibility to edit a chemical molecule … Continued

How to start with Document module?

SUMMARY: You can check our Knowledgebase on how a module generally looks like. Follow the steps to access the Document module: 1. Open the Document module 2. Open a record 1. Open the Document module   1. This area will … Continued

How to start with Reagent & Supplies module?

SUMMARY: You can check our Knowledgebase on how a module generally looks like. This is how reagents & supplies module will look like. *The records won’t generally show at first. You need to click on the search icon with an … Continued

How to use Plasmid Map Editor?

SUMMARY: Inside LabCollector  there are 13 by default modules, amongst which you can find the Plasmids module This module not only offers you the possibility to import plasmids, but also create your own ones with the help of the Plasmid Map Editor. But in order … Continued

How to add/edit maintenance for equipment (v6.0)

LabCollector provides you the option of adding maintenance to any lab equipment. This helps you to keep a tab on all maintenance done for particular equipment.  For v5.4 & below check this KB. – It also helps you to abide … Continued

How to export equipment maintenance report?

LabCollector allows you to export the report related to equipment calibration. This report can be useful when a lab is required to meet ISO 17025 standards.  You have 2 options to export equipment maintenance:- 1. Export maintenance report of a … Continued

Manage your reagent lots (v6.0)

In Module Reagent & Supplies, every reagent/chemical that you buy for the lab is received in a large amount to create a stock. This is called a lot in LabCollector. To manage your reagent lots several parts in the LabCollector … Continued

How do I create alerts with lots? (v6.0)

LabCollector offers two possibilities to create alerts for reagents & supplies. The options 1 and 2 are explained in detail below. 1. Storage Alert 2. Availability Alert To create alerts for reagent & Supplies (for options &  )  you have … Continued

Manage storage for Reagent & Supplies module (v6.0)

   To Manage your storage and reagent, LabCollector offers you several possibilities which are explained below. Reagent & Supplies module only accept/support Secondary storage.   To select storage location first go to Preferences > Reagents & Supplies > Main Here … Continued

How do I print risk and safety data information?

To print risk and safety information for a reagent go to the Reagents and supplies module. Choose the reagent record for which you want to print the risk and safety information. Under the ID tab, click on the ‘eye’ which … Continued

Risk codes

To help you to import Risk & Safety data. Please see this KB for more information on importing data. NFPA 704 Classification 1. Special notice Code Description ACID Acid ALK Alkaline BIO Biological Hazard COR Corrosive CRYO Cryogenic OX Oxidizer … Continued

Reagent & supplies preferences

The Reagents & Supplies preferences can be found by going to Admin > Preferences > Reagents & Supplies. This preferences page has the following settings: General settings: 1. Reagent categories 2. Packaging sizes 3. Batch/Lots: Units of measurement 6. Storage … Continued

Manage your reagent lots

To use this feature there are several parts of LabCollector that must be set up first. Some of the setup requires admin or super-admin level access. Use Admin > Preferences > Reagents & Supplies to check or adjust these preferences. … Continued

Manage storage for Reagent & Supplies module

LabCollector offers two options to manage reagent and supplies storage. Follow: Admin > Preferences > Reagent & Supplies and choose one storage option. If you select the Simple storage option, follow Admin > Storage > Simple Reagent Storage and list … Continued

How to dispose of a lot?

LabCollector offers the possibility to dispose of lots, that could potentially be contaminated, expired, or that has any other issue. Please note that only certain user levels that were specified in Admin -> Preferences -> Reagents & Supplies can destroy a … Continued

How do I manage vendors and sellers?

SUMMARY: 1. How to manage my vendors and sellers? 1a. Sellers & Suppliers Management 1b. Address Book Options 1. How to manage my vendors and sellers? Note Please note that the option to manage vendors/sellers is only accessible through super-administrator … Continued

How do I manage animal crossings?

SUMMARY: Animals have been used for biomedical research purposes for decades. Maintaining proper organization, nutrition, care of the animals is a must need for having proper data in experimentation. For this sole purpose, LabCollector’s animal module allows you to create … Continued

Can I add a custom module to fit my specific needs?

LabCollector integrates predefined modules to store specific types of data. Nevertheless, real situations are endless and therefore it also includes the possibility to create and design custom modules. The settings for Custom Module configuration, are located in Admin > Data … Continued